A wattage rating is a measure of how much power a power supply can provide. It is important to know the wattage rating of a power supply unit in order to make informed decisions about which one to purchase.
Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites.
The Question
SuperUser reader TK Kocheran is curious about power supplies:
What is the difference? And what, for that matter, do the 80 Plus designations mean on modern PSUs?
The Answer
Contributors Mixxiphoid and Hennes share some insight into the PSU labeling methods. Mixxiphoid writes:
Hennes explains the value of a system-appropriate PSU:
Example: If your 1200W supply has a 80 PLUS label on it, it will supply probably 1200W but will consume 1500W. I think you 800W supply will be sufficient, but it won’t guarantee you safety.
Clearly, you should aim to have your PSU sized appropriately for your system–putting a high-load PSU into a basic desktop machine doesn’t increase your safety margin and decreases your efficiency costing you more money in the long run.
However note that the PSU draws AC power from the wall socket, converts it to some other DC voltages, and provides those to your system. There is some loss during this conversion. How much depends on the quality of your PSU and on how much power you draw from it.
Almost any PSU is very inefficient when you draw less then 20% of max rated power from it. Almost any PSU has less than peak efficiency when you draw close to the max rated power from it. Almost any PSU has their optimum efficiency around 40% to 60% of maximum load.
Thus if you get a PSU which is ‘just large enough’ or ‘way to big’ it is likely to be less efficient. [But note that your PC does not consume a fixed or constant level of power. At idle, when not much is happening, the DC power consumed will be low. Perform a lot of processing and I/O operations, then power demand goes high.]
A nice example of areal world efficiency graph is this:
will there be any tangible difference in the outlet wattage draw between a 1200W power supply vs, say, a a 800W power supply?
The 800 Watt PSU would run at 62.5% of max rating. That is a good value. The 1200 Watt PSU would run at only 41% of its maximum rating. That is still within the normally accepted range, but at the low end. If your system is not going to change than the 800 Watt PSu is the better choice.
Note that even with a good (bronze+ or silver rated PSU) you are still loosing about 15% during conversion. 15% of 500 Watt means that your computer would use 500 Watt, but the PSU would draw 588 Watt from the wall socket.
